auth-alg |
string |
|
When WEP is used (ie, key-mgmt = "none" or "ieee8021x") indicate the 802.11 authentication algorithm required by the AP here. One of "open" for Open System, "shared" for Shared Key, or "leap" for Cisco LEAP. When using Cisco LEAP (ie, key-mgmt = "ieee8021x" and auth-alg = "leap") the "leap-username" and "leap-password" properties must be specified. |
group |
array of string |
[] |
A list of group/broadcast encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "wep40", "wep104", "tkip", or "ccmp". |
key-mgmt |
string |
|
Key management used for the connection. One of "none" (WEP), "ieee8021x" (Dynamic WEP), "wpa-none" (Ad-Hoc WPA-PSK), "wpa-psk" (infrastructure WPA-PSK), or "wpa-eap" (WPA-Enterprise). This property must be set for any Wi-Fi connection that uses security. |
leap-password |
string |
|
The login password for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap"). |
leap-password-flags |
NMSettingSecretFlags (uint32) |
|
Flags indicating how to handle the "leap-password" property. |
leap-username |
string |
|
The login username for legacy LEAP connections (ie, key-mgmt = "ieee8021x" and auth-alg = "leap"). |
name |
string |
802-11-wireless-security |
The setting's name, which uniquely identifies the setting within the connection. Each setting type has a name unique to that type, for example "ppp" or "wireless" or "wired". |
pairwise |
array of string |
[] |
A list of pairwise encryption algorithms which prevents connections to Wi-Fi networks that do not utilize one of the algorithms in the list. For maximum compatibility leave this property empty. Each list element may be one of "tkip" or "ccmp". |
proto |
array of string |
[] |
List of strings specifying the allowed WPA protocol versions to use. Each element may be one "wpa" (allow WPA) or "rsn" (allow WPA2/RSN). If not specified, both WPA and RSN connections are allowed. |
psk |
string |
|
Pre-Shared-Key for WPA networks. If the key is 64-characters long, it must contain only hexadecimal characters and is interpreted as a hexadecimal WPA key. Otherwise, the key must be between 8 and 63 ASCII characters (as specified in the 802.11i standard) and is interpreted as a WPA passphrase, and is hashed to derive the actual WPA-PSK used when connecting to the Wi-Fi network. |
psk-flags |
NMSettingSecretFlags (uint32) |
|
Flags indicating how to handle the "psk" property. |
wep-key-flags |
NMSettingSecretFlags (uint32) |
|
Flags indicating how to handle the "wep-key0", "wep-key1", "wep-key2", and "wep-key3" properties. |
wep-key-type |
NMWepKeyType (uint32) |
|
Controls the interpretation of WEP keys. Allowed values are NM_WEP_KEY_TYPE_KEY (1), in which case the key is either a 10- or 26-character hexadecimal string, or a 5- or 13-character ASCII password; or NM_WEP_KEY_TYPE_PASSPHRASE (2), in which case the passphrase is provided as a string and will be hashed using the de-facto MD5 method to derive the actual WEP key. |
wep-key0 |
string |
|
Index 0 WEP key. This is the WEP key used in most networks. See the "wep-key-type" property for a description of how this key is interpreted. |
wep-key1 |
string |
|
Index 1 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted. |
wep-key2 |
string |
|
Index 2 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted. |
wep-key3 |
string |
|
Index 3 WEP key. This WEP index is not used by most networks. See the "wep-key-type" property for a description of how this key is interpreted. |
wep-tx-keyidx |
uint32 |
0 |
When static WEP is used (ie, key-mgmt = "none") and a non-default WEP key index is used by the AP, put that WEP key index here. Valid values are 0 (default key) through 3. Note that some consumer access points (like the Linksys WRT54G) number the keys 1 - 4. |
