NetworkManager D-Bus API Types

NetworkManager D-Bus API Types

enum NMCapability

NMCapability names the numbers in the Capabilities property. Capabilities are positive numbers. They are part of stable API and a certain capability number is guaranteed not to change.

The range 0x7000 - 0x7FFF of capabilities is guaranteed not to be used by upstream NetworkManager. It could thus be used for downstream extensions.

Values

NM_CAPABILITY_TEAM

= 1

Teams can be managed

 

enum NMState

NMState values indicate the current overall networking state.

Values

NM_STATE_UNKNOWN

= 0

Networking state is unknown. This indicates a daemon error that makes it unable to reasonably assess the state. In such event the applications are expected to assume Internet connectivity might be present and not disable controls that require network access. The graphical shells may hide the network accessibility indicator altogether since no meaningful status indication can be provided.

 

NM_STATE_ASLEEP

= 10

Networking is not enabled, the system is being suspended or resumed from suspend.

 

NM_STATE_DISCONNECTED

= 20

There is no active network connection. The graphical shell should indicate no network connectivity and the applications should not attempt to access the network.

 

NM_STATE_DISCONNECTING

= 30

Network connections are being cleaned up. The applications should tear down their network sessions.

 

NM_STATE_CONNECTING

= 40

A network connection is being started The graphical shell should indicate the network is being connected while the applications should still make no attempts to connect the network.

 

NM_STATE_CONNECTED_LOCAL

= 50

There is only local IPv4 and/or IPv6 connectivity, but no default route to access the Internet. The graphical shell should indicate no network connectivity.

 

NM_STATE_CONNECTED_SITE

= 60

There is only site-wide IPv4 and/or IPv6 connectivity. This means a default route is available, but the Internet connectivity check (see "Connectivity" property) did not succeed. The graphical shell should indicate limited network connectivity.

 

NM_STATE_CONNECTED_GLOBAL

= 70

There is global IPv4 and/or IPv6 Internet connectivity This means the Internet connectivity check succeeded, the graphical shell should indicate full network connectivity.

 

enum NMConnectivityState

Values

NM_CONNECTIVITY_UNKNOWN

= 0

Network connectivity is unknown. This means the connectivity checks are disabled (e.g. on server installations) or has not run yet. The graphical shell should assume the Internet connection might be available and not present a captive portal window.

 

NM_CONNECTIVITY_NONE

= 1

The host is not connected to any network. There's no active connection that contains a default route to the internet and thus it makes no sense to even attempt a connectivity check. The graphical shell should use this state to indicate the network connection is unavailable.

 

NM_CONNECTIVITY_PORTAL

= 2

The Internet connection is hijacked by a captive portal gateway. The graphical shell may open a sandboxed web browser window (because the captive portals typically attempt a man-in-the-middle attacks agains the https connections) for the purpose of authenticating to a gateway and retrigger the connectivity check with CheckConnectivity() when the browser window is dismissed.

 

NM_CONNECTIVITY_LIMITED

= 3

The host is connected to a network, does not appear to be able to reach the full Internet, but a captive portal has not been detected.

 

NM_CONNECTIVITY_FULL

= 4

The host is connected to a network, and appears to be able to reach the full Internet.

 

enum NMDeviceType

NMDeviceType values indicate the type of hardware represented by a device object.

Values

NM_DEVICE_TYPE_UNKNOWN

= 0

unknown device

 

NM_DEVICE_TYPE_GENERIC

= 14

generic support for unrecognized device types

 

NM_DEVICE_TYPE_ETHERNET

= 1

a wired ethernet device

 

NM_DEVICE_TYPE_WIFI

= 2

an 802.11 WiFi device

 

NM_DEVICE_TYPE_UNUSED1

= 3

not used

 

NM_DEVICE_TYPE_UNUSED2

= 4

not used

 

NM_DEVICE_TYPE_BT

= 5

a Bluetooth device supporting PAN or DUN access protocols

 

NM_DEVICE_TYPE_OLPC_MESH

= 6

an OLPC XO mesh networking device

 

NM_DEVICE_TYPE_WIMAX

= 7

an 802.16e Mobile WiMAX broadband device

 

NM_DEVICE_TYPE_MODEM

= 8

a modem supporting analog telephone, CDMA/EVDO, GSM/UMTS, or LTE network access protocols

 

NM_DEVICE_TYPE_INFINIBAND

= 9

an IP-over-InfiniBand device

 

NM_DEVICE_TYPE_BOND

= 10

a bond master interface

 

NM_DEVICE_TYPE_VLAN

= 11

an 802.1Q VLAN interface

 

NM_DEVICE_TYPE_ADSL

= 12

ADSL modem

 

NM_DEVICE_TYPE_BRIDGE

= 13

a bridge master interface

 

NM_DEVICE_TYPE_TEAM

= 15

a team master interface

 

NM_DEVICE_TYPE_TUN

= 16

a TUN or TAP interface

 

NM_DEVICE_TYPE_IP_TUNNEL

= 17

a IP tunnel interface

 

NM_DEVICE_TYPE_MACVLAN

= 18

a MACVLAN interface

 

NM_DEVICE_TYPE_VXLAN

= 19

a VXLAN interface

 

NM_DEVICE_TYPE_VETH

= 20

a VETH interface

 

NM_DEVICE_TYPE_MACSEC

= 21

a MACsec interface

 

NM_DEVICE_TYPE_DUMMY

= 22

a dummy interface

 

NM_DEVICE_TYPE_PPP

= 23

a PPP interface

 

NM_DEVICE_TYPE_OVS_INTERFACE

= 24

a OpenVSwitch interface

 

NM_DEVICE_TYPE_OVS_PORT

= 25

a OpenVSwitch port

 

NM_DEVICE_TYPE_OVS_BRIDGE

= 26

a OpenVSwitch bridge

 

enum NMDeviceCapabilities

General device capability flags.

Values

NM_DEVICE_CAP_NONE

= 0x00000000

device has no special capabilities

 

NM_DEVICE_CAP_NM_SUPPORTED

= 0x00000001

NetworkManager supports this device

 

NM_DEVICE_CAP_CARRIER_DETECT

= 0x00000002

this device can indicate carrier status

 

NM_DEVICE_CAP_IS_SOFTWARE

= 0x00000004

this device is a software device

 

NM_DEVICE_CAP_SRIOV

= 0x00000008

this device supports single-root I/O virtualization

 

enum NMDeviceWifiCapabilities

802.11 specific device encryption and authentication capabilities.

Values

NM_WIFI_DEVICE_CAP_NONE

= 0x00000000

device has no encryption/authentication capabilities

 

NM_WIFI_DEVICE_CAP_CIPHER_WEP40

= 0x00000001

device supports 40/64-bit WEP encryption

 

NM_WIFI_DEVICE_CAP_CIPHER_WEP104

= 0x00000002

device supports 104/128-bit WEP encryption

 

NM_WIFI_DEVICE_CAP_CIPHER_TKIP

= 0x00000004

device supports TKIP encryption

 

NM_WIFI_DEVICE_CAP_CIPHER_CCMP

= 0x00000008

device supports AES/CCMP encryption

 

NM_WIFI_DEVICE_CAP_WPA

= 0x00000010

device supports WPA1 authentication

 

NM_WIFI_DEVICE_CAP_RSN

= 0x00000020

device supports WPA2/RSN authentication

 

NM_WIFI_DEVICE_CAP_AP

= 0x00000040

device supports Access Point mode

 

NM_WIFI_DEVICE_CAP_ADHOC

= 0x00000080

device supports Ad-Hoc mode

 

NM_WIFI_DEVICE_CAP_FREQ_VALID

= 0x00000100

device reports frequency capabilities

 

NM_WIFI_DEVICE_CAP_FREQ_2GHZ

= 0x00000200

device supports 2.4GHz frequencies

 

NM_WIFI_DEVICE_CAP_FREQ_5GHZ

= 0x00000400

device supports 5GHz frequencies

 

enum NM80211ApFlags

802.11 access point flags.

Values

NM_802_11_AP_FLAGS_NONE

= 0x00000000

access point has no special capabilities

 

NM_802_11_AP_FLAGS_PRIVACY

= 0x00000001

access point requires authentication and encryption (usually means WEP)

 

NM_802_11_AP_FLAGS_WPS

= 0x00000002

access point supports some WPS method

 

NM_802_11_AP_FLAGS_WPS_PBC

= 0x00000004

access point supports push-button WPS

 

NM_802_11_AP_FLAGS_WPS_PIN

= 0x00000008

access point supports PIN-based WPS

 

enum NM80211ApSecurityFlags

802.11 access point security and authentication flags. These flags describe the current security requirements of an access point as determined from the access point's beacon.

Values

NM_802_11_AP_SEC_NONE

= 0x00000000

the access point has no special security requirements

 

NM_802_11_AP_SEC_PAIR_WEP40

= 0x00000001

40/64-bit WEP is supported for pairwise/unicast encryption

 

NM_802_11_AP_SEC_PAIR_WEP104

= 0x00000002

104/128-bit WEP is supported for pairwise/unicast encryption

 

NM_802_11_AP_SEC_PAIR_TKIP

= 0x00000004

TKIP is supported for pairwise/unicast encryption

 

NM_802_11_AP_SEC_PAIR_CCMP

= 0x00000008

AES/CCMP is supported for pairwise/unicast encryption

 

NM_802_11_AP_SEC_GROUP_WEP40

= 0x00000010

40/64-bit WEP is supported for group/broadcast encryption

 

NM_802_11_AP_SEC_GROUP_WEP104

= 0x00000020

104/128-bit WEP is supported for group/broadcast encryption

 

NM_802_11_AP_SEC_GROUP_TKIP

= 0x00000040

TKIP is supported for group/broadcast encryption

 

NM_802_11_AP_SEC_GROUP_CCMP

= 0x00000080

AES/CCMP is supported for group/broadcast encryption

 

NM_802_11_AP_SEC_KEY_MGMT_PSK

= 0x00000100

WPA/RSN Pre-Shared Key encryption is supported

 

NM_802_11_AP_SEC_KEY_MGMT_802_1X

= 0x00000200

802.1x authentication and key management is supported

 

enum NM80211Mode

Indicates the 802.11 mode an access point or device is currently in.

Values

NM_802_11_MODE_UNKNOWN

= 0

the device or access point mode is unknown

 

NM_802_11_MODE_ADHOC

= 1

for both devices and access point objects, indicates the object is part of an Ad-Hoc 802.11 network without a central coordinating access point.

 

NM_802_11_MODE_INFRA

= 2

the device or access point is in infrastructure mode. For devices, this indicates the device is an 802.11 client/station. For access point objects, this indicates the object is an access point that provides connectivity to clients.

 

NM_802_11_MODE_AP

= 3

the device is an access point/hotspot. Not valid for access point objects; used only for hotspot mode on the local machine.

 

enum NMBluetoothCapabilities

NMBluetoothCapabilities values indicate the usable capabilities of a Bluetooth device.

Values

NM_BT_CAPABILITY_NONE

= 0x00000000

device has no usable capabilities

 

NM_BT_CAPABILITY_DUN

= 0x00000001

device provides Dial-Up Networking capability

 

NM_BT_CAPABILITY_NAP

= 0x00000002

device provides Network Access Point capability

 

enum NMDeviceModemCapabilities

NMDeviceModemCapabilities values indicate the generic radio access technology families a modem device supports. For more information on the specific access technologies the device supports use the ModemManager D-Bus API.

Values

NM_DEVICE_MODEM_CAPABILITY_NONE

= 0x00000000

modem has no usable capabilities

 

NM_DEVICE_MODEM_CAPABILITY_POTS

= 0x00000001

modem uses the analog wired telephone network and is not a wireless/cellular device

 

NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO

= 0x00000002

modem supports at least one of CDMA 1xRTT, EVDO revision 0, EVDO revision A, or EVDO revision B

 

NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS

= 0x00000004

modem supports at least one of GSM, GPRS, EDGE, UMTS, HSDPA, HSUPA, or HSPA+ packet switched data capability

 

NM_DEVICE_MODEM_CAPABILITY_LTE

= 0x00000008

modem has LTE data capability

 

enum NMWimaxNspNetworkType

WiMAX network type.

Values

NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN

= 0

unknown network type

 

NM_WIMAX_NSP_NETWORK_TYPE_HOME

= 1

home network

 

NM_WIMAX_NSP_NETWORK_TYPE_PARTNER

= 2

partner network

 

NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER

= 3

roaming partner network

 

enum NMDeviceState

Values

NM_DEVICE_STATE_UNKNOWN

= 0

the device's state is unknown

 

NM_DEVICE_STATE_UNMANAGED

= 10

the device is recognized, but not managed by NetworkManager

 

NM_DEVICE_STATE_UNAVAILABLE

= 20

the device is managed by NetworkManager, but is not available for use. Reasons may include the wireless switched off, missing firmware, no ethernet carrier, missing supplicant or modem manager, etc.

 

NM_DEVICE_STATE_DISCONNECTED

= 30

the device can be activated, but is currently idle and not connected to a network.

 

NM_DEVICE_STATE_PREPARE

= 40

the device is preparing the connection to the network. This may include operations like changing the MAC address, setting physical link properties, and anything else required to connect to the requested network.

 

NM_DEVICE_STATE_CONFIG

= 50

the device is connecting to the requested network. This may include operations like associating with the WiFi AP, dialing the modem, connecting to the remote Bluetooth device, etc.

 

NM_DEVICE_STATE_NEED_AUTH

= 60

the device requires more information to continue connecting to the requested network. This includes secrets like WiFi passphrases, login passwords, PIN codes, etc.

 

NM_DEVICE_STATE_IP_CONFIG

= 70

the device is requesting IPv4 and/or IPv6 addresses and routing information from the network.

 

NM_DEVICE_STATE_IP_CHECK

= 80

the device is checking whether further action is required for the requested network connection. This may include checking whether only local network access is available, whether a captive portal is blocking access to the Internet, etc.

 

NM_DEVICE_STATE_SECONDARIES

= 90

the device is waiting for a secondary connection (like a VPN) which must activated before the device can be activated

 

NM_DEVICE_STATE_ACTIVATED

= 100

the device has a network connection, either local or global.

 

NM_DEVICE_STATE_DEACTIVATING

= 110

a disconnection from the current network connection was requested, and the device is cleaning up resources used for that connection. The network connection may still be valid.

 

NM_DEVICE_STATE_FAILED

= 120

the device failed to connect to the requested network and is cleaning up the connection request

 

enum NMDeviceStateReason

Device state change reason codes

Values

NM_DEVICE_STATE_REASON_NONE

= 0

No reason given

 

NM_DEVICE_STATE_REASON_UNKNOWN

= 1

Unknown error

 

NM_DEVICE_STATE_REASON_NOW_MANAGED

= 2

Device is now managed

 

NM_DEVICE_STATE_REASON_NOW_UNMANAGED

= 3

Device is now unmanaged

 

NM_DEVICE_STATE_REASON_CONFIG_FAILED

= 4

The device could not be readied for configuration

 

NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE

= 5

IP configuration could not be reserved (no available address, timeout, etc)

 

NM_DEVICE_STATE_REASON_IP_CONFIG_EXPIRED

= 6

The IP config is no longer valid

 

NM_DEVICE_STATE_REASON_NO_SECRETS

= 7

Secrets were required, but not provided

 

NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT

= 8

802.1x supplicant disconnected

 

NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED

= 9

802.1x supplicant configuration failed

 

NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED

= 10

802.1x supplicant failed

 

NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT

= 11

802.1x supplicant took too long to authenticate

 

NM_DEVICE_STATE_REASON_PPP_START_FAILED

= 12

PPP service failed to start

 

NM_DEVICE_STATE_REASON_PPP_DISCONNECT

= 13

PPP service disconnected

 

NM_DEVICE_STATE_REASON_PPP_FAILED

= 14

PPP failed

 

NM_DEVICE_STATE_REASON_DHCP_START_FAILED

= 15

DHCP client failed to start

 

NM_DEVICE_STATE_REASON_DHCP_ERROR

= 16

DHCP client error

 

NM_DEVICE_STATE_REASON_DHCP_FAILED

= 17

DHCP client failed

 

NM_DEVICE_STATE_REASON_SHARED_START_FAILED

= 18

Shared connection service failed to start

 

NM_DEVICE_STATE_REASON_SHARED_FAILED

= 19

Shared connection service failed

 

NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED

= 20

AutoIP service failed to start

 

NM_DEVICE_STATE_REASON_AUTOIP_ERROR

= 21

AutoIP service error

 

NM_DEVICE_STATE_REASON_AUTOIP_FAILED

= 22

AutoIP service failed

 

NM_DEVICE_STATE_REASON_MODEM_BUSY

= 23

The line is busy

 

NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE

= 24

No dial tone

 

NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER

= 25

No carrier could be established

 

NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT

= 26

The dialing request timed out

 

NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED

= 27

The dialing attempt failed

 

NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED

= 28

Modem initialization failed

 

NM_DEVICE_STATE_REASON_GSM_APN_FAILED

= 29

Failed to select the specified APN

 

NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING

= 30

Not searching for networks

 

NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED

= 31

Network registration denied

 

NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT

= 32

Network registration timed out

 

NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED

= 33

Failed to register with the requested network

 

NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED

= 34

PIN check failed

 

NM_DEVICE_STATE_REASON_FIRMWARE_MISSING

= 35

Necessary firmware for the device may be missing

 

NM_DEVICE_STATE_REASON_REMOVED

= 36

The device was removed

 

NM_DEVICE_STATE_REASON_SLEEPING

= 37

NetworkManager went to sleep

 

NM_DEVICE_STATE_REASON_CONNECTION_REMOVED

= 38

The device's active connection disappeared

 

NM_DEVICE_STATE_REASON_USER_REQUESTED

= 39

Device disconnected by user or client

 

NM_DEVICE_STATE_REASON_CARRIER

= 40

Carrier/link changed

 

NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED

= 41

The device's existing connection was assumed

 

NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE

= 42

The supplicant is now available

 

NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND

= 43

The modem could not be found

 

NM_DEVICE_STATE_REASON_BT_FAILED

= 44

The Bluetooth connection failed or timed out

 

NM_DEVICE_STATE_REASON_GSM_SIM_NOT_INSERTED

= 45

GSM Modem's SIM Card not inserted

 

NM_DEVICE_STATE_REASON_GSM_SIM_PIN_REQUIRED

= 46

GSM Modem's SIM Pin required

 

NM_DEVICE_STATE_REASON_GSM_SIM_PUK_REQUIRED

= 47

GSM Modem's SIM Puk required

 

NM_DEVICE_STATE_REASON_GSM_SIM_WRONG

= 48

GSM Modem's SIM wrong

 

NM_DEVICE_STATE_REASON_INFINIBAND_MODE

= 49

InfiniBand device does not support connected mode

 

NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED

= 50

A dependency of the connection failed

 

NM_DEVICE_STATE_REASON_BR2684_FAILED

= 51

Problem with the RFC 2684 Ethernet over ADSL bridge

 

NM_DEVICE_STATE_REASON_MODEM_MANAGER_UNAVAILABLE

= 52

ModemManager not running

 

NM_DEVICE_STATE_REASON_SSID_NOT_FOUND

= 53

The WiFi network could not be found

 

NM_DEVICE_STATE_REASON_SECONDARY_CONNECTION_FAILED

= 54

A secondary connection of the base connection failed

 

NM_DEVICE_STATE_REASON_DCB_FCOE_FAILED

= 55

DCB or FCoE setup failed

 

NM_DEVICE_STATE_REASON_TEAMD_CONTROL_FAILED

= 56

teamd control failed

 

NM_DEVICE_STATE_REASON_MODEM_FAILED

= 57

Modem failed or no longer available

 

NM_DEVICE_STATE_REASON_MODEM_AVAILABLE

= 58

Modem now ready and available

 

NM_DEVICE_STATE_REASON_SIM_PIN_INCORRECT

= 59

SIM PIN was incorrect

 

NM_DEVICE_STATE_REASON_NEW_ACTIVATION

= 60

New connection activation was enqueued

 

NM_DEVICE_STATE_REASON_PARENT_CHANGED

= 61

the device's parent changed

 

NM_DEVICE_STATE_REASON_PARENT_MANAGED_CHANGED

= 62

the device parent's management changed

 

NM_DEVICE_STATE_REASON_OVSDB_FAILED

= 63

problem communicating with OpenVSwitch database

 

enum NMMetered

Since: 1.2

Values

NM_METERED_UNKNOWN

= 0

The metered status is unknown

 

NM_METERED_YES

= 1

Metered, the value was statically set

 

NM_METERED_NO

= 2

Not metered, the value was statically set

 

NM_METERED_GUESS_YES

= 3

Metered, the value was guessed

 

NM_METERED_GUESS_NO

= 4

Not metered, the value was guessed

 

enum NMActiveConnectionState

NMActiveConnectionState values indicate the state of a connection to a specific network while it is starting, connected, or disconnecting from that network.

Values

NM_ACTIVE_CONNECTION_STATE_UNKNOWN

= 0

the state of the connection is unknown

 

NM_ACTIVE_CONNECTION_STATE_ACTIVATING

= 1

a network connection is being prepared

 

NM_ACTIVE_CONNECTION_STATE_ACTIVATED

= 2

there is a connection to the network

 

NM_ACTIVE_CONNECTION_STATE_DEACTIVATING

= 3

the network connection is being torn down and cleaned up

 

NM_ACTIVE_CONNECTION_STATE_DEACTIVATED

= 4

the network connection is disconnected and will be removed

 

enum NMActiveConnectionStateReason

Active connection state reasons.

Since: 1.8

Values

NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN

= 0

The reason for the active connection state change is unknown.

 

NM_ACTIVE_CONNECTION_STATE_REASON_NONE

= 1

No reason was given for the active connection state change.

 

NM_ACTIVE_CONNECTION_STATE_REASON_USER_DISCONNECTED

= 2

The active connection changed state because the user disconnected it.

 

NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED

= 3

The active connection changed state because the device it was using was disconnected.

 

NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_STOPPED

= 4

The service providing the VPN connection was stopped.

 

NM_ACTIVE_CONNECTION_STATE_REASON_IP_CONFIG_INVALID

= 5

The IP config of the active connection was invalid.

 

NM_ACTIVE_CONNECTION_STATE_REASON_CONNECT_TIMEOUT

= 6

The connection attempt to the VPN service timed out.

 

NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT

= 7

A timeout occurred while starting the service providing the VPN connection.

 

NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_FAILED

= 8

Starting the service providing the VPN connection failed.

 

NM_ACTIVE_CONNECTION_STATE_REASON_NO_SECRETS

= 9

Necessary secrets for the connection were not provided.

 

NM_ACTIVE_CONNECTION_STATE_REASON_LOGIN_FAILED

= 10

Authentication to the server failed.

 

NM_ACTIVE_CONNECTION_STATE_REASON_CONNECTION_REMOVED

= 11

The connection was deleted from settings.

 

NM_ACTIVE_CONNECTION_STATE_REASON_DEPENDENCY_FAILED

= 12

Master connection of this connection failed to activate.

 

NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REALIZE_FAILED

= 13

Could not create the software device link.

 

NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REMOVED

= 14

The device this connection depended on disappeared.

 

enum NMSecretAgentGetSecretsFlags

NMSecretAgentGetSecretsFlags values modify the behavior of a GetSecrets request.

Values

NM_SECRET_AGENT_GET_SECRETS_FLAG_NONE

= 0x0

no special behavior; by default no user interaction is allowed and requests for secrets are fulfilled from persistent storage, or if no secrets are available an error is returned.

 

NM_SECRET_AGENT_GET_SECRETS_FLAG_ALLOW_INTERACTION

= 0x1

allows the request to interact with the user, possibly prompting via UI for secrets if any are required, or if none are found in persistent storage.

 

NM_SECRET_AGENT_GET_SECRETS_FLAG_REQUEST_NEW

= 0x2

explicitly prompt for new secrets from the user. This flag signals that NetworkManager thinks any existing secrets are invalid or wrong. This flag implies that interaction is allowed.

 

NM_SECRET_AGENT_GET_SECRETS_FLAG_USER_REQUESTED

= 0x4

set if the request was initiated by user-requested action via the D-Bus interface, as opposed to automatically initiated by NetworkManager in response to (for example) scan results or carrier changes.

 

NM_SECRET_AGENT_GET_SECRETS_FLAG_WPS_PBC_ACTIVE

= 0x8

indicates that WPS enrollment is active with PBC method. The agent may suggest that the user pushes a button on the router instead of supplying a PSK.

 

NM_SECRET_AGENT_GET_SECRETS_FLAG_ONLY_SYSTEM

= 0x80000000

Internal flag, not part of the D-Bus API.

 

NM_SECRET_AGENT_GET_SECRETS_FLAG_NO_ERRORS

= 0x40000000

Internal flag, not part of the D-Bus API.

 

enum NMSecretAgentCapabilities

NMSecretAgentCapabilities indicate various capabilities of the agent.

Values

NM_SECRET_AGENT_CAPABILITY_NONE

= 0x0

the agent supports no special capabilities

 

NM_SECRET_AGENT_CAPABILITY_VPN_HINTS

= 0x1

the agent supports passing hints to VPN plugin authentication dialogs.

 

enum NMIPTunnelMode

The tunneling mode.

Since: 1.2

Values

NM_IP_TUNNEL_MODE_UNKNOWN

= 0

Unknown/unset tunnel mode

 

NM_IP_TUNNEL_MODE_IPIP

= 1

IP in IP tunnel

 

NM_IP_TUNNEL_MODE_GRE

= 2

GRE tunnel

 

NM_IP_TUNNEL_MODE_SIT

= 3

SIT tunnel

 

NM_IP_TUNNEL_MODE_ISATAP

= 4

ISATAP tunnel

 

NM_IP_TUNNEL_MODE_VTI

= 5

VTI tunnel

 

NM_IP_TUNNEL_MODE_IP6IP6

= 6

IPv6 in IPv6 tunnel

 

NM_IP_TUNNEL_MODE_IPIP6

= 7

IPv4 in IPv6 tunnel

 

NM_IP_TUNNEL_MODE_IP6GRE

= 8

IPv6 GRE tunnel

 

NM_IP_TUNNEL_MODE_VTI6

= 9

IPv6 VTI tunnel

 

enum NMCheckpointCreateFlags

The flags for CheckpointCreate call

Since: 1.4

Values

NM_CHECKPOINT_CREATE_FLAG_NONE

= 0

no flags

 

NM_CHECKPOINT_CREATE_FLAG_DESTROY_ALL

= 0x01

when creating a new checkpoint, destroy all existing ones.

 

NM_CHECKPOINT_CREATE_FLAG_DELETE_NEW_CONNECTIONS

= 0x02

upon rollback, delete any new connection added after the checkpoint (Since: 1.6)

 

NM_CHECKPOINT_CREATE_FLAG_DISCONNECT_NEW_DEVICES

= 0x04

upon rollback, disconnect any new device appeared after the checkpoint (Since: 1.6)

 

enum NMRollbackResult

The result of a checkpoint Rollback() operation for a specific device.

Since: 1.4

Values

NM_ROLLBACK_RESULT_OK

= 0

the rollback succeeded.

 

NM_ROLLBACK_RESULT_ERR_NO_DEVICE

= 1

the device no longer exists.

 

NM_ROLLBACK_RESULT_ERR_DEVICE_UNMANAGED

= 2

the device is now unmanaged.

 

NM_ROLLBACK_RESULT_ERR_FAILED

= 3

other errors during rollback.

 

enum NMActivationStateFlags

Flags describing the current activation state.

Since: 1.10

Values

NM_ACTIVATION_STATE_FLAG_NONE

= 0

an alias for numeric zero, no flags set.

 

NM_ACTIVATION_STATE_FLAG_IS_MASTER

= (1LL

the device is a master.

 

NM_ACTIVATION_STATE_FLAG_IS_SLAVE

= (1LL

the device is a slave.

 

NM_ACTIVATION_STATE_FLAG_LAYER2_READY

= (1LL

layer2 is activated and ready.

 

NM_ACTIVATION_STATE_FLAG_IP4_READY

= (1LL

IPv4 setting is completed.

 

NM_ACTIVATION_STATE_FLAG_IP6_READY

= (1LL

IPv6 setting is completed.

 

NM_ACTIVATION_STATE_FLAG_MASTER_HAS_SLAVES

= (1LL

The master has any slave devices attached. This only makes sense if the device is a master.