GNOME.org

RadioButton

Like checkboxes, radio buttons also inherit from Gtk::ToggleButton, but these work in groups, and only one RadioButton in a group can be selected at any one time.

5.4.1. Groups

There are two ways to set up a group of radio buttons. The first way is to create the buttons, and set up their groups afterwards. Only the constructors without a Gtk::RadioButton::Group parameter are used. In the following example, we put 3 radio buttons in a group: 

auto rb1 = Gtk::make_managed<Gtk::RadioButton>("button1");
auto rb2 = Gtk::make_managed<Gtk::RadioButton>("button2");
auto rb3 = Gtk::make_managed<Gtk::RadioButton>("button3");
rb2->join_group(*rb1);
rb3->join_group(*rb1);

We told gtkmm to put all three RadioButtons in the same group by using join_group() to tell the other RadioButtons to share group with the first RadioButton.

The purpose of join_group() is to make it easier to express that you want a given button to use a group established by another. There is another way to do this, using get_group() and set_group(). However, this has a pitfall: Note that you can't do 

rb2->set_group(rb1->get_group());
because get_group() returns a RadioButton::Group by value, and an unnamed rvalue cannot be passed as the lvalue reference needed by set_group(). Instead, you must assign the result of get_group() to a variable and pass that to set_group() as an lvalue: 

auto rb1 = Gtk::make_managed<Gtk::RadioButton>("button1");
auto rb2 = Gtk::make_managed<Gtk::RadioButton>("button2");
auto rb3 = Gtk::make_managed<Gtk::RadioButton>("button3");
auto group = rb1->get_group();
rb2->set_group(group);
rb3->set_group(group);

This works because the group is really a handle and therefore can be discarded once it has been used to tell the radio buttons to group with each other. Still, as join_group() does the same thing in one less line, you might not find much use for this pattern, but it is shown for completeness.

The second way to set up radio buttons is to make a group first, and then add radio buttons to it. Here's an example: 

Gtk::RadioButton::Group group;
auto rb1 = Gtk::make_managed<Gtk::RadioButton>(group, "button1");
auto rb2 = Gtk::make_managed<Gtk::RadioButton>(group, "button2");
auto rb3 = Gtk::make_managed<Gtk::RadioButton>(group, "button3");

We made a new group by simply declaring a variable, group, of type Gtk::RadioButton::Group. Then we made three radio buttons, using a constructor to make each of them part of group.

5.4.2. Methods

RadioButtons are "off" when created; this means that when you first make a group of them, they will all be off. Don't forget to turn one of them on using set_active():

Reference

5.4.3. Example

The following example demonstrates the use of RadioButtons:

Figure 5-3 RadioButton

Source Code

File: radiobuttons.h (For use with gtkmm 3)

#ifndef GTKMM_EXAMPLE_RADIOBUTTONS_H
#define GTKMM_EXAMPLE_RADIOBUTTONS_H

#include <gtkmm/box.h>
#include <gtkmm/window.h>
#include <gtkmm/radiobutton.h>
#include <gtkmm/separator.h>

class RadioButtons : public Gtk::Window
{
public:
  RadioButtons();
  virtual ~RadioButtons();

protected:
  //Signal handlers:
  void on_button_clicked();

  //Child widgets:
  Gtk::Box m_Box_Top, m_Box1, m_Box2;
  Gtk::RadioButton m_RadioButton1, m_RadioButton2, m_RadioButton3;
  Gtk::Separator m_Separator;
  Gtk::Button m_Button_Close;
};

#endif //GTKMM_EXAMPLE_RADIOBUTTONS_H

File: main.cc (For use with gtkmm 3)

#include "radiobuttons.h"
#include <gtkmm/application.h>

int main(int argc, char *argv[])
{
  auto app = Gtk::Application::create(argc, argv, "org.gtkmm.example");

  RadioButtons buttons;

  //Shows the window and returns when it is closed.
  return app->run(buttons);
}

File: radiobuttons.cc (For use with gtkmm 3)

#include "radiobuttons.h"


RadioButtons::RadioButtons() :
  m_Box_Top(Gtk::ORIENTATION_VERTICAL),
  m_Box1(Gtk::ORIENTATION_VERTICAL, 10),
  m_Box2(Gtk::ORIENTATION_VERTICAL, 10),
  m_RadioButton1("button1"),
  m_RadioButton2("button2"),
  m_RadioButton3("button3"),
  m_Button_Close("close")
{
  // Set title and border of the window
  set_title("radio buttons");
  set_border_width(0);

  // Put radio buttons 2 and 3 in the same group as 1:
  m_RadioButton2.join_group(m_RadioButton1);
  m_RadioButton3.join_group(m_RadioButton1);

  // Add outer box to the window (because the window
  // can only contain a single widget)
  add(m_Box_Top);

  //Put the inner boxes and the separator in the outer box:
  m_Box_Top.pack_start(m_Box1);
  m_Box_Top.pack_start(m_Separator);
  m_Box_Top.pack_start(m_Box2);

  // Set the inner boxes' borders
  m_Box2.set_border_width(10);
  m_Box1.set_border_width(10);

  // Put the radio buttons in Box1:
  m_Box1.pack_start(m_RadioButton1);
  m_Box1.pack_start(m_RadioButton2);
  m_Box1.pack_start(m_RadioButton3);

  // Set the second button active
  m_RadioButton2.set_active();

  // Put Close button in Box2:
  m_Box2.pack_start(m_Button_Close);

  // Make the button the default widget
  m_Button_Close.set_can_default();
  m_Button_Close.grab_default();

  // Connect the clicked signal of the button to
  // RadioButtons::on_button_clicked()
  m_Button_Close.signal_clicked().connect(sigc::mem_fun(*this,
              &RadioButtons::on_button_clicked) );

  // Show all children of the window
  show_all_children();
}

RadioButtons::~RadioButtons()
{
}

void RadioButtons::on_button_clicked()
{
  hide(); //to close the application.
}
CheckButton Range Widgets

About